₹32,000 to buy + ₹39,091 electricity
A lifetime-cost decision
Efficient vs Cheaper Appliance Planner
Compare the upfront price and long-term electricity and maintenance costs of two major appliances.
Choose the appliance
An always-on appliance where annual units are especially useful. Preset figures are editable examples, not product claims.
Include maintenance estimates
Use annual averages if one model is likely to cost more to service.
Price today versus cost over time
You could spend ₹4,753 less with the efficient model
By ₹4,753 across purchase, electricity and maintenance.
₹44,000 to buy + ₹22,337 electricity
This is a cost calculation, not a prediction of product life, performance or repair needs.
Personalized Planning
Insights from your numbers
Patience pays after year 8
You plan to keep this refrigerator for 10 years, leaving 2 years after the modelled break-even point.
Your usage creates the gap
The efficient model uses 180 fewer units a year, worth about ₹1,530 at today’s tariff.
Test the fragile assumptions
Try a shorter ownership period and a lower tariff increase. If the same model still wins, the decision is less dependent on an optimistic long-term forecast.
Practical Meaning
What this means for your refrigerator
Upfront trade-off
The efficient model changes today’s cash outlay by ₹12,000.
Running-cost gap
Modelled electricity savings are ₹16,753 over the full period.
Time matters
The cumulative paths first meet in year 8.
Understanding the decision
Let’s see the underlying logic
Yearly electricity cost = annual kWh × that year’s tariff. The tariff changes by your entered rate each year. Break-even is the first year the efficient model’s cumulative total is no higher than the cheaper model’s.
How the paths develop
Cumulative ownership cost| Year | Cheaper model | Efficient model | Difference |
|---|---|---|---|
| 1 | ₹36,770 | ₹47,240 | ₹10,470 to cheaper |
| 8 | ₹72,241 | ₹71,109 | ₹1,132 to efficient |
| 10 | ₹83,091 | ₹78,337 | ₹4,753 to efficient |
What this cannot tell you: actual tariffs, usage, appliance life and repairs may differ. Cooling quality, capacity, noise, features, warranty and service access are not priced here. A lower modelled cost is neither a product recommendation nor a guarantee.
Practical Guidance
Questions to ask before you choose
How should I compare two refrigerators?
Use the annual electricity consumption shown for each refrigerator, then enter the prices and how long you expect to keep it. Refrigerators run all day, so even a modest annual unit difference can compound over a long ownership period.
What should I enter for an air conditioner?
Compare air conditioners with the same cooling capacity and use annual electricity figures based on similar operating assumptions. Room size, insulation, climate, thermostat setting and daily hours can make your actual bill materially different.
Can I use this for a washing machine?
Yes. Compare annual electricity estimates for a similar drum size and wash pattern. If your household runs far more or fewer cycles than the label assumption, scale both annual kWh figures to match your expected use.
Is the more efficient appliance always the better buy?
No. A large price premium, light usage or a short ownership period can leave the cheaper model ahead. The planner identifies that case instead of assuming efficiency always wins.
What about repairs, warranties and resale value?
Enter your best annual maintenance estimate for each model. Treat uncertain one-off repairs, warranty differences and resale value separately; the result is a planning estimate, not a reliability prediction.
Where do I find annual electricity use?
Look for annual kWh or units per year on the product energy label, manufacturer specification sheet or comparable retailer listing. Use the same type of figure for both models and avoid comparing only star ratings.
Your next step
Look further
Maintained and verified by the Calculated Wisdom Financial Research Team · Reviewed 29 Aug 2026